DEUTZ-FAHR FL35-70HP Series, Operation Manual

Page: 373 / 417

Main technical specifications of the tractor
372
Notice: The parameters given in the technical specifications table are based on standard configuration.
FL500/FL504/FL554-1
Items Unit FL500 FL504 FL554-1
Type ——
4 × 2
wheeled
tractor
4 × 4
wheeled
tractor
4 × 4 wheeled tractor
Rated traction force kN 9 14 14.5
Overall
dimension
Length (including front ballast and
rear hitch)
mm 3790 3970
Width (common wheel track and
measured from outer edge of standard
tire)
mm 1620
Height (Measured from the ground to
the top of the muffler, and standard
tires)
mm 2130
Wheel base mm 1968 1992 2041
Wheel
tread
(standard
tires)
Front wheel mm
1200, 1300,
1400, 1500
(common
1300)
1250 1250
Front wheel adjustment mode ——
Continuous
ly
adjustable
Fixed Fixed
Rear wheel mm 1200, 1300, 1400, 1500 (common 1300)/1300-1500
Rear wheel adjustment mode —— Adjustable stepwise/adjustable steplessly
Ground
clearance
Minimum ground clearance mm 400 325 325
Agricultural ground clearance mm 450 375 375
Minimum
radius
of
turning
circle
Conducting single-side braking m 3.3±0.3 3.8±0.3 4.3±0.3
No single-side braking is conducted m 3.7±0.3 4.3±0.3 4.7±0.3
Structure mass kg 1870 1965 2190
Minimum operating mass kg 2030 2135 2360
Mass
distributing
Front wheel kg 830 885 1020
Rear wheel kg 1200 1250 1340
Ballast
Front ballast kg 108 or 144
Rear ballast kg 90/180
Transmissi
on
Clutch —— Single disk, dry type, double-acting clutch
Transmission ——
Combined type; 4 × (2 + 1) gear, gear shift with sliding
sleeve / combined type; 4 × 2 × (1 + 1) gear, gear shift
with sliding sleeve/ combined type; 4 × 3 × (1 + 1) gear,
gear shift with sliding sleeve