DEUTZ-FAHR FL35-70HP Series, Operation Manual

Page: 229 / 417

Electrical system
228
Description of each pin:
1. Power line connected to left steering light;
2. Power line connected to brake lamp;
3. Grounded;
4. It is not used temporarily;
5. Power line connected to work light;
6. Power line connected to right steering light;
7. Power line connected to position light. Fig. 6-32
6.5.2.Installation of other electronic elements or equipment
The tractor is equipped with electronic parts and components whose functioning may be disturbed by
electromagnetic emissions from other equipment. These emissions may put people in danger if the following safety
guidelines are not followed.
In the case of installation of additional electrical or electronic components that are connected to the tractor’s
electrical system, the user is responsible for checking that the installation does not release emissions which interfere
with the operation of the existing electronic or other components of the tractor.
This is particularly a problem with the following types of equipment:
●
Radio
●
CB radio receiving equipment
●
Mobile telephone (ETACS, GSM and so on)
●
As for installation of other mobile remote communication systems (such as: radio device, telephone), attentions
must be paid to the following supplementary instructions:
●
Only equipment permitted in accordance with relevant national laws and regulations will be installed (such as:
BZT permission of Germany).
●
Guarantee that device is installed solidly.
●
Portable or mobile device in the vehicle can be used only when it is solidly connected to antenna outside of the
vehicle.
●
Antenna transmission element and electronic elements of vehicle must be installed respectively.
Antenna must be installed as per professional way. What’s more, a very good connection must be available between
the antenna and grounding point of the vehicle. Line device and maximum current must comply with relevant