DEUTZ-FAHR FL35-70HP Series, Operation Manual

Page: 31 / 417

Product Mark
30
Any person who uses the tractor must know:
●
Excessive exposure in sun or long-time noise will cause serious damage for listening and general health. The
bigger the noise level, the bigger the exposure is, the bigger the danger will be. Combination of these factors
can also be expressed by LEP (personal noise contact level).
●
Therefore, you shall know noise level generated by the tractor. Please refer to the chapter of “technical
parameters” of the Operation Manual for more information.
●
When the noise level is more than certain value or the tractor has been operated for long time, ear protective
device will be used. In general, personal exposure reaches or exceeds 85db, protective measures will be
adopted. You can select various protective measures such as earmuff, earphone and helmet.
5.3. Protective and safety equipment
●
Guarantee all safety equipment of the tractor is properly installed at their positions. Guarantee all protective,
preventive and safety signs are installed correctly under good state as per their specifications.
●
Some devices are indispensable and required by laws for safety of the tractor in accordance with local
provisions.
●
Don’t remove or dismantle safety device.
➢
Please check whether the tractor has been equipped with following devices to improve safety of the driver
and other personnel:
◇
Seat belt;
◇
PTO shaft cover;
◇
Rearview mirror;
◇
Slow traffic sign, additional protective device, additional lamp and identification;
◇
Triangle warning sign for danger.
5.4. Check the tractor and implement
●
Before working, the tractor will be checked to guarantee all devices are under good working state.
●
Movement of all pedals shall not be hindered. All pedals must be reset to original position without barrier.
Object that will hinder pedal stroke cannot be placed on the floor or underneath the pedal. Overturning or
skidding object cannot be placed near the pedal. Additional banquet or other auxiliary pads cannot be placed
surrounding the pedal to avoid affecting actions of the pedal and causing accidental danger.
●
Check will be conducted to guarantee that there is not loosening, damaged or lost part.
●
ROPS and safety belt will be checked to confirm whether they are damaged or not.
●
Damaged protective device and damaged and abraded safety belt must be replaced.