DEUTZ-FAHR FL35-70HP Series, Operation Manual, Page: 194 / 417

Electrical system
193
Notice:
The front and rear tires should be inflated identically for 4WD tractors to prevent abnormal tire wear.
Notice:
When carrying out any operations on the tires, do not enter the area in which the rim and flange could be
propelled in the event of explosion. Always use metal containment cages or tire retainers on the rims and
flange, because under some circumstances the trajectory of the rim and flange in case of explosion could
change unexpectedly, with SERIOUS DANGER OF INJURY AND DEATH.
Inflation pressure of radial tires
Notice:
For the tire bead to seat correctly on the rim, the inflation pressure must never exceed 200kPa (0.2 MPa).
If the tire is not seated correctly on the rim, deflate it and repeat the operation. Higher inflation pressures
may cause the tire/rim to explode. We recommend using all the appropriate safety devices when inflating
tires.
Notice:
A tire inflated to less than 80% of the recommended inflation pressure can be damaged internally during
use and explode on inflation to the optimal pressure WITH DANGER OF SERIOUS INJURY OR
DEATH.
Important:
Work on agricultural land requires maximum adhesion. The rear tire inflation pressure could be
reduced accordingly.
Check the manufacturer’s minimum inflation pressure recommendations before
lowering the pressure.