Dell Brocade DCX, Configuration Manual

Page: 1424 / 1436

1352 BigIron RX Series Configuration Guide
53-1001810-01
Redundant management module
E
MAC port security
Redundant management module
Commands See ...
age <minutes> “Setting the port security age timer” on page 945
autosave <minutes> “Autosaving secure MAC addresses to the
startup-config file”
on page 945
enable “Enabling the MAC port security feature” on
page 944
“Re-enabling a port” on page 947
maximum <number-of-addresses> “Setting the maximum number of secure MAC
addresses for an interface”
on page 944
port security “Enabling the MAC port security feature” on
page 944
restrict-max-deny <number> “Violation restrict” on page 946
secure <mac-address> “Specifying secure MAC addresses” on page 945
show mac [all] “Displaying a list of MAC addresses” on page 951
show port security <module> | <portnum> “Displaying port security settings” on page 949
show port security mac “Displaying the secure MAC addresses on the device”
on page 950
show port security statistics <portnum> I <module> “Displaying port security statistics” on page 950
shutdown-time <minutes> “Port shutdown time” on page 946
violation restrict “Violation restrict” on page 946
violation shutdown “Violation shutdown” on page 946
Commands See ...
active-management <mgt-module> “Changing the default active Chassis slot” on
page 31
sync-standby “Comparing and synchronizing files” on page 33
force-sync-standby “Synchronizing files without comparison” on page 34
switchover “Manually switching over to the standby
management module”
on page 34
reset “Manually switching over to the standby
management module”
on page 34
boot system bootp | [flash primary | flash secondary] |
slot
<number> <filename> | tftp <ip-address>
<filename>
“Rebooting the active and standby management
modules”
on page 34
reload “Rebooting the active and standby management
modules”
on page 34
reboot-standby “Rebooting the active and standby management
modules”
on page 34