Dell Brocade DCX, Configuration Manual

Page: 558 / 1436

486 BigIron RX Series Configuration Guide
53-1001810-01
Configuring multicast traffic engineering
18
Displaying the scheduler configuration
To view a Scheduler configuration, use the following command.
Syntax: show qos scheduler
Configuring multicast traffic engineering
Using the multicast traffic engineering feature, you can limit the amount of multicast traffic that
passes through a packet processor. This command is configured on an individual port but applies
to all ports connected to the same packet processor.
NOTE
If a user configures any one port between 1-12 (or 13 - 24) with a 'qos multicast best-effort rate of
1Mbps', no more then 1Mbps of multicast traffic will be forwarded at one time on ports 1-12 or
(13-24).
Starting release 02.5.00, data-plane multicast traffic is rate-limited to 1.8 Gbps per packet
processor.
BigIron RX#show qos scheduler
Port | Scheduler Type Prio0 Prio1 Prio2 Prio3
| (Rates where specified are in Kbps)
-------+-------------------------------------+---------+---------+---------
13/1 | strict
13/2 | enhanced-strict Rate 100000 200000 300000 Remaining
13/3 | min-rate Rate 102400 204800 307200 409600
13/4 | strict
13/5 | strict
13/6 | max-rate Rate 400000 400000 800000 10000000
13/7 | destination-weighted Weight 15 25 25 35
13/8 | strict
13/9 | source-weighted Weight 5 15 35 45
13/10 | strict
13/11 | strict
13/12 | strict
13/13 | strict
13/14 | strict
13/15 | strict
13/16 | strict
13/17 | strict
13/18 | strict
13/19 | strict
13/20 | strict
13/21 | strict
13/22 | strict
13/23 | strict
13/24 | strict