Dell Brocade DCX, Configuration Manual, Page: 1405 / 1436

BigIron RX Series Configuration Guide 1333
53-1001810-01
IS-IS
E
lsp-refresh-interval <secs> “Changing the LSP refresh interval” on page 890
maximum-paths <number> “Changing the maximum number of load sharing
paths”
on page 893
max-lsp-lifetime <secs> “Changing the maximum LSP lifetime” on page 890
metric-style wide [level-1-only | level-2-only] “Changing the metric style” on page 893
net <area-id> . <system-id> . <sel> “Enabling IS-IS globally” on page 885
“Disabling and enabling IS-IS on an interface” on
page 899
redistribute bgp [level-1 | level-1-2 | level-2 | metric
<number> | metric-type external | internal | route-map
<name> ]
“Redistributing BGP4+ routes into IPv4 IS-IS” on
page 898
redistribute connected [level-1 | level-1-2 | level-2 |
metric
<number> | metric-type external | internal |
route-map <name> ]
“Redistributing directly connected routes into IPv4
IS-IS”
on page 897
redistribute isis level-1 into level-2 | level-2 into level-1
[prefix-list
<name> ]
“Redistributing IPv4 IS-IS routes within IPv4 IS-IS” on
page 898
redistribute ospf [level-1 | level-1-2 | level-2 | match
external1 | external2 | internal | metric
<number> |
metric-type external | internal | route-map <name> ]
“Redistributing OSPF routes into IPv4 IS-IS” on
page 898
redistribute rip [level-1 | level-1-2 | level-2 | metric
<number> | metric-type external | internal | route-map
<name> ]
“Redistributing RIP routes into IPv4 IS-IS” on
page 897
redistribute static [level-1 | level-1-2 | level-2 | metric
<number> | metric-type external | internal | route-map
<name> ]
“Redistributing static IPv4 routes into IPv4 IS-IS” on
page 896
retransmit-interval “Changing the LSP interval and retransmit interval”
on page 891
route-map <map-name> permit | deny
<sequence-number>
“Enabling advertisement of a default route” on
page 893
router isis “Global configuration level” on page 884
“Disabling and enabling IS-IS on an interface” on
page 899
set level level-1 | level-1-2 | level-2 “Enabling advertisement of a default route” on
page 893
set-overload-bit [on-startup <secs> ] “Setting the overload bit” on page 887
show isis config “Displaying the IS-IS configuration in the
running-config”
on page 903
show isis counts “Displaying error statistics” on page 913
show isis database [ <lsp-id> | detail | l1 | l2 | level1 |
level2]
“Displaying summary information” on page 910
show isis database detail [l1 | l2 | level1 | level2] “Displaying detailed information” on page 911
show isis hostname “Displaying the name mappings” on page 903
show isis interface “Displaying interface information” on page 906
show isis neighbor “Displaying neighbor information” on page 904
Commands See ...