Dell Brocade DCX, Configuration Manual

Page: 897 / 1436

BigIron RX Series Configuration Guide 825
53-1001810-01
Displaying BGP4 information
26
Displaying the active BGP4 configuration
To view the active BGP4 configuration information contained in the running configuration without
displaying the entire running configuration, enter the following command at any level of the CLI.
BigIron RX# show ip bgp config
router bgp
local-as 200
neighbor 102.102.1.1 remote-as 200
neighbor 102.102.1.1 ebgp-multihop
neighbor 102.102.1.1 update-source loopback 1
neighbor 192.168.2.1 remote-as 100
neighbor 200.200.2.2 remote-as 400
neighbor 1000:2::1:1 remote-as 200
neighbor 2000:1::1:2 remote-as 400
neighbor 4444::1 remote-as 300
address-family ipv4 unicast
no neighbor 1000:2::1:1 activate
no neighbor 2000:1::1:2 activate
no neighbor 4444::1 activate
exit-address-family
address-family ipv4 multicast
exit-address-family
address-family ipv6 unicast
redistribute static
neighbor 1000:2::1:1 activate
neighbor 2000:1::1:2 activate
neighbor 4444::1 activate
exit-address-family
end of BGP configuration
Syntax: show ip bgp config
Sent The number of BGP4 routes that the BigIron RX has sent to the neighbor.
ToSend The number of routes the BigIron RX has queued to send to this
neighbor.
TABLE 119 BGP4 summary information (Continued)
This field... Displays...