Dell Brocade DCX, Configuration Manual

Page: 1387 / 1436

BigIron RX Series Configuration Guide 1315
53-1001810-01
BGP4
E
distance <external-distance> <internal-distance>
<local-distance>
“Changing administrative distances” on page 765
enforce-first-as “Requiring the first AS to be the neighbor’s AS” on
page 766
exit-address-family “Entering and exiting the address family
configuration level”
on page 749
fast-external-fallover “Enabling fast external fallover” on page 767
interface loopback <num> “Adding a loopback interface” on page 789
ip as-path access-list <string> [seq <seq-value> ] deny |
permit <regular-expression>
“Defining an AS-path ACL” on page 793
ip community-list extended <string> [seq <seq-value> ]
deny | permit
<community-num> | <regular-expression>
“Defining a community ACL” on page 796
ip community-list standard <string> [seq <seq-value> ]
deny | permit <community-num>
“Defining a community ACL” on page 796
ip prefix-list <name> [seq <seq-value> ] [description
<string> ] deny | permit <network-addr> / <mask-bits> [ge
<ge-value> ] [le <le-value> ]
“Defining and applying IP prefix lists” on page 797
ip router-id <ip-addr> “Changing the router ID” on page 788
local-as <num> “Configuring a BGP confederation” on page 761
“Setting the local AS number” on page 767
match
[as-path
<name> ] |
[address-filters | as-path-filters | community-filters
<num,num,...> ] |
[community <acl> exact-match] |
[ip address <acl> | prefix-list <string> ] |
[ip route-source <acl> | prefix <name> ]
[metric <num> ] |
[next-hop <address-filter-list> ] |
[level-1 | level-2 | level-1-2]
[route-type internal | external-type1 | external-type2] |
[tag
<tag-value> ]
“Specifying the match conditions” on page 800
match as-path <num> “Matching based on AS-path ACL” on page 802
match community <acl> exact-match “Matching on routes containing a specific set of
communities”
on page 803
match community <string> “Matching based on community ACL” on page 802
match ip address <name-or-num> “Matching based on destination network” on
page 802
match ip address prefix-list <name> “Matching based on destination network” on
page 802
match ip next-hop <num> “Matching based on next-hop router” on page 803
match ip next-hop prefix-list <name> “Matching based on next-hop router” on page 803
match ip route-source <acl> | prefix <name> “Matching based on the route source” on page 803
maximum-paths <num> “Changing the maximum number of shared BGP4
paths”
on page 768
Commands See ...