Dell Brocade DCX, Configuration Manual

Page: 1241 / 1436

BigIron RX Series Configuration Guide 1169
53-1001810-01
Displaying BGP4+ information
45
This display shows the following information.
Displaying IPv6 neighbor route summary information
You can display route summary information for all neighbors or a specified neighbor only.
TABLE 199 Detailed best and unreachable routes from a BGP4+ neighbor
This field... Displays...
Number of accepted routes from a
specified neighbor (appears only in
display for all routes) For information about this field, refer to Table 198 on page 1167.
Status codes For information about this field, refer to Table 198 on page 1167.
Prefix For information about this field, refer to Table 198 on page 1167.
Status For information about this field, refer to Table 198 on page 1167.
Age The age of the route, in seconds.
Next Hop For information about this field, refer to Table 198 on page 1167.
Learned from Peer The IPv6 address of the neighbor from which this route is learned. “Local
Router” indicates that the switch itself learned the route.
LOCAL_PREF For information about this field, refer to Table 198 on page 1167.
MED The value of the RIB route’s MED attribute. If the route does not have a
metric, this field is blank.
Origin The source of the route information. The origin can be one of the
following:
•
EGP – The routes with this set of attributes came to BGP4+ through
EGP.
•
IGP – The routes with this set of attributes came to BGP4+ through
IGP.
•
INCOMPLETE – The routes came from an origin other than one of
the above. For example, they may have been redistributed from
OSPFv3 or RIPng.
When BGP4+ compares multiple routes to a destination to select the
best route, IGP is preferred over EGP and both are preferred over
INCOMPLETE.
Weight For information about this field, refer to Table 198 on page 1167.
AS-PATH For information about this field, refer to Table 198 on page 1167.