Dell Brocade DCX, Configuration Manual

Page: 979 / 1436

BigIron RX Series Configuration Guide 907
53-1001810-01
Displaying IPv4 IS-IS information
29
This display shows the following information.
TABLE 133 IS-IS Interface information
This field... Displays...
Total number of IS-IS interfaces The number of interfaces on which IS-IS is enabled.
Interface The port or virtual interface number to which the information listed
below applies.
Local Circuit Number The ID that the instance of IS-IS running on the interface applied to the
circuit between this interface and the interface at the other end of the
link.
Circuit Type The type of IS-IS circuit running on the interface. The circuit type is set to
BCAST (broadcast).
Circuit Mode The IS-IS type in use on the circuit. The mode can be one of the
following:
•
LEVEL-1
•
LEVEL-2
•
LEVEL-1-2
Circuit State The state of the circuit, which can be one of the following:
•
DOWN
•
UP
Passive State The passive state determines whether the interface is allowed to form
an IS-IS adjacency with the IS at the other end of the circuit. The state
can be one of the following:
•
FALSE – The passive option is disabled. The interface can form an
adjacency with the IS at the other end of the link.
•
TRUE – The passive option is enabled. The interface cannot form
an adjacency, but can still advertise itself into the area.
MTU The maximum length supported for IS-IS PDUs sent on this interface.
Authentication Password The password assigned to the IS-IS interface.
Level-1 Metric The default-metric value that the BigIron RX inserts in IS-IS Level-1 PDUs
for this interface.
Level-1 Priority The priority of this IS to be elected as the Designated IS for Level-1 in
this broadcast network.
Level-1 Hello Interval The number of seconds the software waits between sending Level-1
hello PDUs to the IS at the other end of the circuit.
Level-1 Hello Multiplier The number by which the software multiplies the hello interval to
calculate the hold time set in Level-1 Hello PDUs sent on the circuit.
Level-1 Designated IS The NET of the Level-1 Designated IS.
Level-1 DIS Changes The number of times the NET of the Level-1 Designated IS has changed.
Level-2 Metric The default-metric value that the BigIron RX inserts in IS-IS Level-2 PDUs
for this interface.
Level-2 Priority The priority of this IS to be elected as the Designated IS for Level-2 in
this broadcast network.
Level-2 Hello Interval The number of seconds the software waits between sending Level-2
Hello messages to the IS at the other end of the circuit.
Level-2 Hello Multiplier The number by which the software multiplies the hello interval to
calculate the hold time set for Level-2 Hello PDUs sent on this circuit.