Dell Brocade DCX, Configuration Manual

Page: 1414 / 1436

1342 BigIron RX Series Configuration Guide
53-1001810-01
Rate limiting
E
Rate limiting
qos-tos trust cos | dscp “Specifying trust level” on page 470
qos-tos “Enabling ToS-based QoS” on page 470
show qos multicast [port-no] “Displaying the multicast traffic engineering
configuration”
on page 487
show qos scheduler “Displaying the scheduler configuration” on
page 486
show qos wred “Displaying the WRED configuration” on page 481
show qos-tos “Displaying QoS configuration information” on
page 474
static-mac-address <mac-addr> ethernet <portnum>
[priority <num> ] [host-type | router-type | fixed-host]
“Assigning static MAC address entries to priority
queues”
on page 470
Commands See ...
Commands See ...
rate-limit in access-group <number> |
named-access-group <acl-name> <average-rate>
<maximum-burst>
“Configuring a port-and-ACL-based traffic policing
policy”
on page 501
rate-limit in ipv6-named-access-group <name>
<average-rate> <maximum-burst>
“Configuring a port-and-priority-based rate limiting
policy”
on page 499
rate-limit in group <group-number> <average-rate>
<maximum-burst>
“Configuring a VLAN-group-based rate limiting policy”
on page 500
rate-limit in group <group-number> priority <num>
<average-rate> <maximum-burst>
“Configuring a VLAN-group-based rate limiting policy”
on page 500
rate-limit input priority <num> <average-rate>
<maximum-burst>
“Configuring a port-and-priority-based rate limiting
policy”
on page 499
rate-limit input <average-rate> <maximum-burst> “Configuring a port-based rate limiting policy” on
page 498
rate-limit input vlan <vlan-number> <average-rate>
<maximum-burst>
“Configuring a port-and-VLAN-based rate limiting
policy”
on page 499
rate-limit strict-acl “Configuring a port-and-IPv6 ACL-based traffic
reduction”
on page 502
rl-vlan-group <vlan-group-number> “Configuring a VLAN-group-based rate limiting policy”
on page 500
show rate-limit [counters [interface <slot/port> ]] [group
[ <vlan-number> ]] [interface <slot/port> ]
“Displaying traffic reduction” on page 504
vlan <vlan-number> [to <vlan-number] “Configuring a VLAN-group-based rate limiting policy”
on page 500