Dell Brocade DCX, Configuration Manual

Page: 1389 / 1436

BigIron RX Series Configuration Guide 1317
53-1001810-01
BGP4
E
next-hop-recursion “Enabling recursive next-hop lookups” on page 784
redistribute connected [metric <num> ] [route-map
<map-name> ]
“Redistributing connected routes” on page 785
redistribute connected | ospf | rip | isis | static “Using the IP default route as a valid next hop for a
BGP4 route”
on page 781
redistribute isis level-1 | level-1-2 | level-2 [metric <num> ]
[route-map <map-name> ]
“Redistributing ISIS” on page 786
redistribute ospf [match internal | external1 | external2]
[metric
<num> ] [route-map <map-name> ]
“Redistributing OSPF external routes” on page 785
redistribute rip [metric <num> ] [route-map <map-name> ] “Redistributing RIP routes” on page 785
redistribute static [metric <num> ] [route-map
<map-name> ]
“Redistributing static routes” on page 786
route-map <map-name> permit | deny <num> “Entering the route map Into the software” on
page 800
set
[as-path [prepend <as-num,as-num,...>]] |
[automatic-tag] |
[comm-list
<acl> delete] |
[community <num> : <num> | <num> | internet | local-as
| no-advertise | no-export] |
[dampening [
<half-life> <reuse> <suppress>
<max-suppress-time> ]]
[ip next hop <ip-addr> ]
[ip next-hop peer-address] |
[local-preference
<num> ] |
[metric [+ | - ] <num> | none] |
[metric-type type-1 | type-2] | external
[metric-type internal] |
[next-hop
<ip-addr> ] |
[origin igp | incomplete] |
[tag
<tag-value> ] |
[weight <num> ]
“Setting parameters in the routes” on page 804
set comm-list <acl> delete “Deleting a community from a BGP4 route” on
page 806
set ip next-hop peer-address “Setting the next hop of a BGP4 route” on page 806
set metric-type internal “Setting a BP4 route’s MED to be equal to the
next-hop route IGP metric”
on page 805
show ip bgp [route] <ip-addr> / <prefix> [longer-prefixes] |
<ip-addr>
“Displaying information for a specific route” on
page 842
show ip bgp attribute-entries “Displaying BGP4 route-attribute entries” on
page 846
show ip bgp config “Displaying the active BGP4 configuration” on
page 825
show ip bgp filtered-routes [ <ip-addr> ] |
[as-path-access-list <num> ] | [detail] | [prefix-list
<string> ]
“Displaying the filtered routes received from the
neighbor or peer group”
on page 816
Commands See ...