Dell Brocade DCX, Configuration Manual

Page: 1370 / 1436

1298 BigIron RX Series Configuration Guide
53-1001810-01
Syslog messages
A
Informational Trunk group ( <ports> ) created by 802.3ad
link-aggregation module.
802.3ad link aggregation is configured on the
device, and the feature has dynamically
created a trunk group (aggregate link).
The
<ports> is a list of the ports that were
aggregated to make the trunk group.
Informational Bridge root changed, vlan <vlan-id> , new root
ID <string> , root interface <portnum>
A Spanning Tree Protocol (STP) topology
change has occurred.
The
<vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The
<root-id> is the STP bridge root ID.
The <portnum> is the number of the port
connected to the new root bridge.
Informational Bridge is new root, vlan <vlan-id> ,
root ID <root-id>
A Spanning Tree Protocol (STP) topology
change has occurred, resulting in the BigIron
RX becoming the root bridge.
The
<vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The
<root-id> is the STP bridge root ID.
Informational Bridge topology change, vlan <vlan-id> ,
interface <portnum >, changed state to
<stp-state>
A Spanning Tree Protocol (STP) topology
change has occurred on a port.
The
<vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The
<portnum> is the port number.
The <stp-state> is the new STP state and can
be one of the following:
•
disabled
•
blocking
•
listening
•
learning
•
forwarding
•
unknown
Informational startup configuration was changed
or
startup configuration was changed by
<user-name>
A configuration change was saved to the
startup configuration file.
The
<user-name> is the user’s ID, if they
entered a user ID to log in.
Informational vlan <vlan-id> interface <portnum> Bridge TC
Event (DOT1wTransition)
802.1W recognized a topology change event
in the bridge. The topology change event is
the forwarding action that started on a
non-edge Designated port or Root port.
Informational vlan <vlan-id > interface <portnum> STP state
-> <state > (DOT1wTransition)
802.1W changed the state of a port to a new
state: forwarding, learning, blocking. If the
port changes to blocking, the bridge port is in
discarding state.
Informational vlan <vlan-id> New RootPort <portnum>
(RootSelection)
802.1W changed the port’s role to Root port,
using the root selection computation.
Informational vlan <vlan-id> New RootBridge
<mac-address> RootPort <portnum>
(BpduRcvd)
802.1W selected a new root bridge as a
result of the BPDUs received on a bridge port.
TABLE 222 Brocade Syslog messages (Continued)
Message level Message Explanation