Dell Brocade DCX, Configuration Manual

Page: 1245 / 1436

BigIron RX Series Configuration Guide 1173
53-1001810-01
Displaying BGP4+ information
45
Confederation Peers The numbers of the local ASs contained in the confederation. This list
matches the confederation peer list you configure on the switch.
Maximum Number of Paths Supported
for Load Sharing The maximum number of route paths across which the switch can
balance traffic to the same destination. The feature is enabled by
default but the default number of paths is 1. You can increase the
number from 2 – 8 paths. For more information, refer to the “Configuring
BGP4” chapter in the
Router Configuration Guide .
Number of Neighbors Configured The number of BGP4+ neighbors configured on this switch.
Number of Routes Installed The number of BGP4+ routes in the switch’s BGP4+ route table.
To display the BGP4+ route table, refer to
“Displaying the BGP4+ route
table” on page 1133.
Number of Routes Advertising to All
Neighbors The total of the RtSent and RtToSend columns for all neighbors.
Number of Attribute Entries Installed The number of BGP4+ route-attribute entries in the switch’s
route-attributes table. To display the route-attribute table, refer to
“Displaying BGP4+ route-attribute entries” on page 1140.
Neighbor Address The IPv6 addresses of this switch’s BGP4+ neighbors.
AS# The AS number.
TABLE 201 BGP4+ summary information (Continued)
This field... Displays...