Dell Brocade DCX, Configuration Manual

Page: 1415 / 1436

BigIron RX Series Configuration Guide 1343
53-1001810-01
RIP
E
RIP
Commands See ...
clear ip rip local “Clearing the RIP routes from the routing table” on
page 673
clear ip rip routes <ip-addr> / <mask-bits> “Clearing the RIP routes from the routing table” on
page 673
default-metric <1-15> “Changing the default redistribution metric” on
page 668
distance <num> “Changing the administrative distance” on page 666
ip prefix-list <name> permit | deny <source-ip-address> |
any <source-mask> | any
“Using prefix lists and route maps as route filters” on
page 671
ip rip learn-default “Configuring route learning and advertising
parameters”
on page 668
ip rip metric-offset <num> in | out “Changing the cost of routes learned or advertised on
a port”
on page 666
ip rip poison-reverse “Changing the route loop prevention method” on
page 669
ip rip prefix-list <name> in | out “Using prefix lists and route maps as route filters” on
page 671
ip rip route-map <name> in | out “Using prefix lists and route maps as route filters” on
page 671
ip rip v1-only | v1-compatible-v2 | v2-only “Enabling RIP” on page 666
learn-default “Configuring route learning and advertising
parameters”
on page 668
neighbor <filter-num> permit | deny <source-ip-address>
| any
“Configuring a RIP neighbor filter” on page 669
poison-local-routes “Changing the route loop prevention method” on
page 669
poison-reverse “Changing the route loop prevention method” on
page 669
prefix-list <name> in | out “Using prefix lists and route maps as route filters” on
page 671
redistribute connected | bgp | ospf | static [metric
<value> | route-map <name> ]
“Configuring redistribution filters” on page 667
router rip “Enabling RIP” on page 666
show ip rip “Displaying RIP filters” on page 672
timers <seconds> “Setting RIP timers” on page 672