Dell Brocade DCX, Configuration Manual

Page: 1394 / 1436

1322 BigIron RX Series Configuration Guide
53-1001810-01
Metro Ring protocol
E
Metro Ring protocol
show ip route summary “Displaying the IP route table” on page 220
show ip static-arp [ethernet <portnum> | mac-address
<xxxx.xxxx.xxxx> [ <mask> ] |
<ip-addr> [ <ip-mask> ]] [ <num> ] [| begin <expression> |
exclude <expression> | include <expression> ]
“Displaying the static ARP table” on page 218
show ip traffic “Displaying IP traffic statistics” on page 223
system-max ip-static-arp <num> “Changing the maximum number of entries the static
ARP table can hold”
on page 184
traceroute <host-ip-addr> [maxttl <value> ] [minttl
<value> ] [numeric] [timeout <value> ] [source-ip <ip
addr> ]
“Using a DNS name to initiate a trace route” on
page 170
Commands See ...
Commands See ...
metro-ring <ring-id> “Configuring MRP with shared interfaces” on
page 403
name <string> “Configuring MRP with shared interfaces” on
page 403
master “Adding an MRP ring to a VLAN” on page 396
ring-interface ethernet <primary-if> ethernet
<secondary-if>
“Adding an MRP ring to a VLAN” on page 396
enable “Configuring MRP with shared interfaces” on
page 403
hello-time <ms> “Changing the hello and preforwarding times” on
page 397
preforwarding-time <ms> “Changing the hello and preforwarding times” on
page 397
diagnostics “Enabling MRP diagnostics” on page 404
show metro <ring-id> diag “Displaying MRP diagnostics” on page 404
“Displaying ring information” on page 406
show topology-group [ <group-id> ] “Displaying topology group information” on page 405
show metro [ <ring-id> ] “Displaying ring information” on page 406