28
CORN I NG ASCENT FBR PD SYSTEM
Figure 7-2.
Harvest phase screen.
Table 7-1.
Main screen overview.
Label
Navigation Buttons and Status Indicators
Reference
1
Password login access screen.
Section 7.3
2
There are separate screens for Cell Culture Overview and Harvest
Overview. Each screen shows the equipment modules for process
control.
Figure 7-1
Figure 7-2
3
Trends screen.
Section 7.10
4
There are two main phases: Sequence and Auxiliary. Sequence
Phases are Media and Harvest Phases. An Auxiliary Phase can be
introduced during a Media Sequence Phase.
Section 7.6
5
Pump and probe calibration screens.
Section 7.7
6
PID loop (Proportional, Integral, Derivative) configuration screens for:
MCV DO, MCV pH, and FBR DO Control.
Section 7.9
7
Access to Data File Entry, Recirculation Volume, USB Save, and Meta-
Data Entry.
Section 7.11
8
Diagnostics.
Section 7.12
9
VPN Enabled or Disabled. VPN has a configurable time limit up to 24
hours, after which VPN is automatically disabled.
Section 7.13
10
These are buttons to navigate and reset alarms.
Section 7.14
11
Phase status display information with green flashing prompt button,
an Abort button and Global Reset button.
Section 7.5
12
System screen for setting up the time and entering the instrument
identification, access to Clean Screen, shutting down the user
interface and resetting operator and engineer passwords.
NOTE:
See section 7.3 for Access Levels for the various features listed.
Section 7.4
Figure 7-2 is a separate screen for Harvest Phase. The same navigation buttons on the left-hand column, the alarms banner and global
phase status displays on Cell Culture Overview are shown.
7.2 Display Symbols, Colors, and Modes
Table 7-2 shows key process parameters, access to all configurations, the visual differentiation when an equipment or process module is
On or Off, and other colors that require attention.
