manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 81

Maintenance Procedure

If print results are blurred or colors are not printed correctly, the print head nozzle (FINE cartridge) is probably clogged.
Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then clean the print
head.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the print head may improve print
quality.

 Important

 Do not rinse or wipe the FINE cartridge. This can cause trouble with the FINE cartridge.

 Note

Before performing maintenance

 Check if ink remains in the FINE cartridge.

Checking the Ink Status with the LCD on the Machine

 Check if the FINE cartridge is installed correctly.

Replacing Procedure

Also check if the protective tape on the bottom of the FINE cartridge is removed.

 If an error message appears on the LCD, see A Message Is Displayed.
 Increasing the print quality in the printer driver settings may improve the print result.

Changing the Print Quality and Correcting Image Data

When the Print Results Are Blurred or Uneven:

Step 1

Print the nozzle check pattern.

From the machine

Printing the Nozzle Check Pattern

From the computer

Use Your Computer to Print a Nozzle Check

Pattern

Examine the nozzle check pattern.

Examining the Nozzle Check Pattern

After cleaning the print head,
print and examine the nozzle
check pattern.

If there are missing lines or horizontal white streaks

in the pattern:

Step 2

Clean the print head.

From the machine

Cleaning the Print Head

From the computer

Cleaning the Print Heads from Your

Computer

If the problem is not resolved after cleaning the print

head twice:

 

 

81

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands