manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 880

Printing Photos in Online Photo Album

You can access the internet photo sharing site using the operation panel of the machine and print the photo
in online photo album (photos uploaded from devices such as computer).

Before using the web service, see the terms of service.

Notice for Web Service Printing

To access the photo sharing site from the machine, you have to register the account on the photo sharing
site to the machine. Refer to the following and register the account.

Registering the Account on Photo Sharing Site

Important

LAN connection with the machine and internet connection are required to use this function.
Before you use this function, you have to get the account on the photo sharing site. For getting the

account, refer to the photo sharing site.

Depending on the type of the photo, the photo may not be displayed on the LCD or printed.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Load 4" x 6" / 10 x 15 cm photo paper.

Loading Paper

3.

Press the 

MENU

 button.

The menu screen is displayed.

4.

Select 

 

Photo

, then press the 

OK

 button.

5.

Select 

 

Online Album print

, then press the 

OK

 button.

6.

Use the 

 button to select the photo sharing site to use, then press the 

OK

button.

The machine accesses on the photo sharing site, then the online albums are displayed on the LCD.

Note

If you have not registered the account on the photo sharing site to the machine yet, the

confirmation screen to register the account is displayed.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands