manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 273

Scanning takes longer than usual when you enable this function.

•

Sharpen outline

Emphasizes the outline of the subjects to sharpen the image.

•

Reduce show-through

Sharpens text in an item or reduces show-through in newspapers, etc.

•

Reduce moire

Reduces moire patterns.
Printed materials are displayed as a collection of fine dots. "Moire" is a phenomenon where
uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots
are scanned.

Note

Scanning takes longer than usual when you enable 

Reduce moire

.

•

Reduce gutter shadow

Reduces gutter shadows that appear between pages when scanning open booklets.

Important

This function is available only when scanning from the platen.
Available only when the 

Compress scanned images upon transfer

 checkbox is not

selected.

Note

Use ScanGear (scanner driver)'s 

Advanced Mode

 tab to correct gutter shadows when

scanning non-standard size items or specified areas.
Refer to "Gutter Shadow Correction" for your model from Home of the 

Online Manual

 for

details.

•

Correct slanted text document

Detects the scanned text and corrects the angle (within -0.1 to -10 degrees or +0.1 to +10
degrees) of the document.

Important

The following types of documents may not be corrected properly since the text cannot be

detected correctly.

Documents in which the text lines are inclined more than 10 degrees or the angles vary

by line

Documents containing both vertical and horizontal text
Documents with extremely large or small fonts
Documents with small amount of text
Documents containing figures/images
Hand-written text
Documents containing both vertical and horizontal lines (tables)

Note

Scanning takes longer than usual when you enable 

Correct slanted text document

.

•

Detect the orientation of text document and rotate image

Automatically rotates the image to the correct orientation by detecting the orientation of text in the
scanned document.

Important

Only text documents written in languages that can be selected from 

Document Language

in the 

Settings (General Settings)

 dialog box are supported.

Settings (General Settings) Dialog Box

The orientation may not be detected for the following types of settings or documents since

the text cannot be detected correctly.

Resolution is outside the range of 300 dpi to 600 dpi
Font size is outside the range of 8 points to 48 points
Documents containing special fonts, effects, italics, or hand-written text
Documents with patterned backgrounds

In that case, select the 

Check scan results

 checkbox and rotate the image in the 

Save

Settings

 dialog box.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands