manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 934

Displaying the Preview Screen

When you load the original on the platen glass and select 

Standard copy

 or 

Frame erase copy

 in

Advanced print

, pressing a 

Function

 button allows you to preview an image of the printout on the

preview screen.

When 

Standard copy

 is selected, press the left 

Function

 button on the Copy standby screen.

When 

Frame erase copy

 is selected, press the right 

Function

 button on the print settings screen.

Important

The preview screen is not available when you load the original in the ADF.
In the following conditions, you cannot use the left 

Function

 button when the Copy standby

screen is displayed.

2-sided

 is selected for 

2-sidedPrintSetting

.

2-on-1 copy

 or 

4-on-1 copy

 is selected for 

Layout

.

ON

 is selected for 

Collate

.

When 

2-sided

, 

2-on-1 copy

, or 

4-on-1 copy

 is selected and the original is loaded on the platen

glass, you can set to display the preview screen after scanning the original is finished.

Two-Sided Copying
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Collated Copying

The original will be scanned to display the preview image. Therefore, do not open the document

cover until the preview screen is displayed.

Originals are rescanned after displaying the preview screen and before copying starts.

Therefore, do not open the document cover or remove the original from the platen glass while

Scanning document...

 is displayed.

1. Preview of the original

The original that is set on the platen glass is displayed. If the displayed image is skewed, refer to
Loading Originals and reset the original properly, then display the preview screen again and
preview the original.

2. Page size

A frame showing the selected page size appears over the image. The inside of the frame will be
printed.

3. Magnification

The magnification setting, which was set when the preview screen was displayed, is displayed. If
the setting other than 

Fit to page

 is selected, you can change the magnification setting using the

 button.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands