manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 474

Printing Does Not Start

•

Check 1: Make sure that the power plug is securely plugged in, then

turn the machine on.

While any lamp on the operation panel is flashing, the machine is initializing. Wait until the lamp stops
flashing and remains lit.

Note

When printing large data such as a photo or graphics, it may take longer to start printing. While

any lamp on the operation panel is flashing, the computer is processing data and sending it to the
machine. Wait until printing starts.

•

Check 2: Make sure that the machine is connected to your computer

properly.

When the machine is connected to your computer with a USB cable, make sure that the USB cable is
securely plugged in to the machine and the computer, then check the followings:

• If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to

the computer, and try printing again. If printing starts normally, there is a problem with the relay
device. Consult the reseller of the relay device for details.

• There could also be a problem with the USB cable. Replace the USB cable and try printing again.

When you use the machine over LAN, make sure that the machine is connected to the network with a
LAN cable or is set up correctly.

•

Check 3: Make sure that the front tray is open.

•

Check 4: If you are printing from the computer and there are any

unnecessary print jobs, delete them.

Deleting the Undesired Print Job

•

Check 5: Make sure that your machine's name is selected in the Print

dialog box.

The machine will not print properly if you are using a printer driver for a different printer.

Make sure that your machine's name is selected in the Print dialog box.

Note

To make the machine the one selected by default, select 

Set as Default Printer

.

•

Check 6: Configure the printer port appropriately.

Make sure that the printer port is configured appropriately.

1.

Log on as a user account with administrator privilege.

2.

Select items from the 

Start

 menu as shown below.

•

In Windows 7, select 

Devices and Printers

 from the 

Start

 menu.

•

In Windows Vista, select the 

Start

 menu > 

Control Panel

 > 

Hardware and Sound

 >

Printers

.

•

In Windows XP, select the 

Start

 menu > 

Control Panel

 > 

Printers and Other Hardware

 >

Printers and Faxes

.

3.

Open the properties of the printer driver for the machine.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands