manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 930

Specifications

Communication
method

Bluetooth v2.0

Maximum Speed

1.44 Mbps

Output

Bluetooth Power Class 2

Communication
distance

Line-of-sight distance: approx. 33 ft./10 m *
* It may vary depending on factors including the presence of obstacles between
communication equipment, radio wave conditions, the presence of magnetic fields
around microwave ovens and locations where electrostatic and radio interference
occur, the types of software and operating systems used, and receiver sensitivity
and antenna performance of communication equipment.

Profile

SPP (Serial Port Profile)
OPP (Object Push Profile)
BIP (Basic Imaging Profile)
HCRP (Hardcopy Cable Replacement Profile)

Compatible PCs

A computer in which an internal Bluetooth module is installed or a computer to
which an optional Bluetooth adapter (available from various manufacturers) is
attached.
OS/Software:
Microsoft Windows 7 (Satisfying any one of the following conditions is needed)

•

Add a Bluetooth Device

 is displayed in 

Hardware and Sound

 under 

Control

Panel

• Bluetooth Stack for Windows by Toshiba Version 7.00.00 or later is installed

Microsoft Windows Vista (Satisfying any one of the following conditions is needed)

•

Bluetooth Devices

 is displayed in 

Hardware and Sound

 under 

Control

Panel

• Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed

Microsoft Windows XP (Satisfying any one of the following conditions is needed)

• Windows XP SP2 or later is installed, and 

Bluetooth Devices

 is displayed in

Printers and Other Hardware

 under 

Control Panel

• Bluetooth Stack for Windows by Toshiba Version 3.00.10 or later is installed

Frequency band

2.4 GHz band (2.400 GHz to 2.4835 GHz)

Power supply

Supplied from the USB flash drive port on the printer, DC 4.4 V to 5.25 V

Maximum power
consumption

500 mW (MAX)

Operating
temperature

5 to 35°C (41 to 95°F)

Operating humidity

10 to 90% RH (no condensation)

Dimensions (Width x
Depth x Height)

18.5 (W) x 47.5 (D) x 8.7 (H) mm (with cap attached)
0.73 (W) x 1.87 (D) x 0.35 (H) inches

Weight

Approx. 7 g (0.25 oz)

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands