manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 868

By pressing the center 

Function

 button, you can select photo with specifying the date (last

modified date of data).

Using Useful Display Functions

5.

Change view

By pressing the left 

Function

 button, you can change the display method.

Using Useful Display Functions

Note

If you specify the number of copies for each photo, use the 

 button to display the photo you

want to print and use the 

+

 or 

-

 button to specify the number of copies when the desired photo is

displayed.

You can also display the screen to specify the number of copies by pressing the 

OK

 button when

the desired photo is displayed. When the screen to specify the number of copies is displayed,
specify the number of copies by using the 

+

 or 

-

 buttons. Press the 

OK

 button to display the photo

selection screen.

8.

Press the 

Color

 button.

The machine starts printing.

Note

To cancel printing, press the 

Stop

 button.

You can add the print job by pressing the right 

Function

 button while printing.

Adding the Print Job

Adding the Print Job

You can add the print job (Reserve photo print) while printing photos.

Follow the procedure below to add the print job.

1.

Press the right 

Function

 button when the print progress screen is displayed.

The photo selection screen is displayed.

2.

Select the next photo to print.

Note

While the photo selection screen is displayed, the machine prints the reserved photos.

The 

 reserved photo icon appears on the photo included in the print job.

3.

Specify the number of copies for each photo.

Note

While processing the print job, you cannot change the setting for 

Page size

 or 

Type

 on print

settings confirmation screen. The setting is the same as the setting for the photo included in the
print job.

4.

Press the 

Color

 button.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands