manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 128

Print settings

•

Prevent paper abrasion

Use this setting only if the print surface becomes smudged.

Important

Be sure to set this back to 

OFF

 after printing since it may result in lower printing speed or lower print quality.

•

Extended copy amount

Selects the amount of image that extends off the paper when printing in borderless (full).
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page. You can change the
width to be cropped from the borders of the original image as needed.
Cropped area will be larger if 

Extended amount: Large

 is selected.

Important

This setting can be applied under the following conditions:

- performing borderless copying
- Borderless is selected for Border when copying printed photos

Note

If printouts contain margins even though you are printing in Borderless, specifying 

Extended amount: Large

for this setting may help solve the problem.

•

Auto photo fix setting

When 

ON

 is selected, you can select whether to print photos using the Exif information recorded in the image files in

the following cases.

•

Auto photo fix

 is selected for 

Photo fix

 when printing from a USB flash drive.

• When 

Auto photo fix

 is selected for 

Photo fix

 in printing a photo in online photo album.

• The print setting on the PictBridge compliant device is set to 

Default

* or 

On

 when printing with a PictBridge

compliant device.
* When 

Default

 is selected for the print setting on the PictBridge compliant device, select 

Auto photo fix

 for

Photo fix

 in 

PictBridge print settings

.

•

Prevent paper double-feed

Select 

ON

 to prevent double-feed of plain paper.

Important

Select 

ON

 only when double-feed of plain paper occurs.

128

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands