manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 130

The following setting items are displayed.

Items

Setting

Connection

Active/Inactive

IPv4 address

XXX. XXX. XXX. XXX

IPv4 subnet mask

XXX. XXX. XXX. XXX

IPv4 default gateway

XXX. XXX. XXX. XXX

IPv6 address

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX

IPv6 subnet prefix length

XXX

IPv6 default gateway

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX

MAC address

XX:XX:XX:XX:XX:XX

IPsec settings

Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Inactive

Pre-shared key

XXXXXXXXXXXXXXXX

Printer name

XXXXXXXXXXXXXXX

Bonjour service name

XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX

("XX" represents alphanumeric characters.)

•

Print LAN details

You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out:

Printing Out Network Setting Information

Important

This printout contains valuable information about your computer. Handle it with care.

•

Other settings

•

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

You cannot use the same printer name as that already used for other LAN connected devices.
You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

Performs IPv4 or IPv6 setting.

•

WSD setting

Setting items when you use WSD (one of the network protocols supported in Windows 7 and Windows Vista).

Enable/disable WSD

Selects whether WSD is enabled or disabled.

Note

When this setting is activated, the printer icon is displayed on the Network Explorer in Windows 7 and

Windows Vista.

WSD scan from this device

Selecting 

Enable

 allows you to transfer the scanned data to the computer using WSD.

Timeout setting

Specifies the timeout length.

•

Bonjour settings

Setting items for LAN using Bonjour for Mac OS.

Enable/disable Bonjour

Selecting 

Enable

 allows you to use Bonjour to perform the network settings.

130

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands