manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 749

Summary of Reports and Lists

The machine prints the report of sending or receiving a fax automatically. You can print the list of the fax/
telephone number or the current settings.

Type of Reports and Lists

Printing Report or List

Type of Reports and Lists

Report or List

Description

ACTIVITY REPORT

Shows recent fax transactions at sight.

• You can print ACTIVITY REPORT manually.

For details on the procedure to print, see 

Printing Report or List

.

• The * (asterisk) is appended to the history already printed on ACTIVITY

REPORT.

• If you select 

Print

 for 

Activity report

 in 

Auto print settings

 under 

FAX

settings

, the machine prints ACTIVITY REPORT for the 20 histories of sent

and received faxes automatically.

Auto print settings

Telephone number
list

• CODED SPEED

DIAL
TELEPHONE
NO. LIST

• GROUP DIAL

TELEPHONE
NO. LIST

Lists the numbers and names registered.
You can print the list for coded speed dial and group dial.
For details on the procedure to print, see 

Printing Report or List

.

USER'S DATA LIST

Lists the current settings of the machine and the registered sender information.
For details on the procedure to print, see 

Printing Report or List

.

MEMORY LIST

Lists the documents currently stored in the machine's memory.
For details on the procedure to print, see 

Printing Report or List

.

Note

You can print MEMORY LIST by selecting 

Print memory list

 in 

Memory

reference

 in the Fax menu.

Printing a List of the Document in Machine's Memory

REJECTED
NUMBER LIST

Lists the rejected numbers.
For details on the procedure to print, see 

Printing Report or List

.

CALLER HISTORY

Lists the caller history.
This list is available when Caller ID service is subscribed.
For details on the procedure to print, see 

Printing Report or List

.

This list may not be supported depending on the country or region of purchase.

TX REPORT/ERROR
TX REPORT

Either of these reports is printed after each fax transmission.

• At the time of purchase, ERROR TX REPORT is set to be printed only when a

transmission error occurred.
You can set the machine to print TX REPORT each time it sends a document,
or disable printing of the report by selecting 

TX report

 in 

Auto print settings

under 

FAX settings

.

You can also specify the print setting so that the first page of the fax is printed
along with the report.

Auto print settings

Note

The first page of the fax is not printed in color transmission.

• MULTI TRANSMISSION REPORT is printed after sequential broadcasting of a

document.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands