manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 188

Canon IJ Network Tool Screen

This section describes the items and menus displayed on the 

Canon IJ Network Tool

 screen.

Items on the 

Canon IJ Network Tool

 Screen

Canon IJ Network Tool

 Menus

Items on the Canon IJ Network Tool Screen

The following item is displayed on the 

Canon IJ Network Tool

 screen.

1.

Printers:

The printer name, status, printer model name, and port name are displayed.
A check mark next to the printer in the 

Name

 list indicates it is set as the default printer.

Configuration changes are applied to the selected printer.

2.

Update

Performs printer detection again. Click this button if the target printer is not displayed.

Important

To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.
If 

No Driver

 is displayed for the name, associate the port with the printer.

When the Printer Driver Is Not Associated with a Port

If 

Not Found

 is displayed for the status, check the followings:

The access point is turned on.
When using wired LAN, the LAN cable is connected properly.

If the printer on a network is not detected, make sure that the printer is turned on, then click 

Update

. It may take

several minutes to detect printers. If the printer is not yet detected, connect the machine and the computer with a
USB cable, then click 

Update

.

If the printer is being used from another computer, a screen is displayed informing you of this condition.

Note

This item has the same function as 

Refresh

 in the 

View

 menu.

3.

Configuration...

Click to configure settings of the selected printer.

Configuration Screen

Note

You cannot configure a printer that has the status 

Not Found

.

This item has the same function as 

Configuration...

 in the 

Settings

 menu.

Canon IJ Network Tool Menus

The following menu is displayed from the 

Canon IJ Network Tool

 screen.

188

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands