manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 280

•

Save in

Displays the folder in which to save the scanned images. To change the folder, specify the destination
folder in the 

Select Destination Folder

 dialog box displayed by selecting 

Add...

 from the pull-down

menu.
The default save folders are as follows.
Windows 7: 

My Documents

 folder

Windows Vista: 

Documents

 folder

Windows XP: 

My Documents

 folder

Important

When the Settings dialog box is displayed from My Image Garden, this option does not appear.

•

Enable large image scans

Select this checkbox to scan images up to 21000 pixels x 30000 pixels and 1.8 GB.

Important

When this checkbox is selected, you cannot select 

Send to an application

, 

Send to a folder

,

Attach to e-mail

, or 

Start OCR

.

When the Settings dialog box is displayed from My Image Garden, this option does not appear.

Note

When this checkbox is not selected, images up to 10208 pixels x 14032 pixels can be scanned.

•

Check scan results

Displays the 

Save Settings

 dialog box after scanning.

Save Settings Dialog Box

Important

When the Settings dialog box is displayed from My Image Garden, this option does not appear.

(2) Application Settings Area

•

Open with an application

Select this when you want to enhance or correct the scanned images.
You can specify the application from the pull-down menu.

•

Send to an application

Select this when you want to use the scanned images as they are in an application that allows you to
browse or organize images.
You can specify the application from the pull-down menu.

•

Send to a folder

Select this when you also want to save the scanned images to a folder other than the one specified in

Save in

.

You can specify the folder from the pull-down menu.

•

Attach to e-mail

Select this when you want to send e-mails with the scanned images attached.
You can specify the e-mail client you want to start from the pull-down menu.

•

Start OCR

Select this when you want to convert text in the image into text data using specified OCR software.
You can specify the application from the pull-down menu.

•

Do not start any application

Saves to the folder specified in 

Save in

.

Note

Specify the application or folder in the 

Select Application

 or 

Select Destination Folder

 dialog box

displayed by selecting 

Add...

 from the pull-down menu.

•

Instructions

Opens this guide.

•

Defaults

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands