manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 238

Scanning Multiple Items at One Time

You can scan two or more photos (small items) placed on the platen at one time and save each image
individually.

Important

The following types of items may not be cropped correctly. In that case, adjust the cropping frames

(scan areas) in whole image view of ScanGear (scanner driver) and scan again.

Photos that have a whitish background
Items printed on white paper, hand-written documents, business cards, etc.
Thin items
Thick items

Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" for your model
from Home of the 

Online Manual

 for details.

Using Auto Scan

Whether there are multiple items or not is detected automatically. Click 

Auto

 and scan.

Easy Scanning with Auto Scan

Not Using Auto Scan

In the Settings dialog box, set 

Paper Size

 to 

Auto scan

 and scan.

Note

The screens for scanning with favorite settings are used as examples in the following descriptions.

1.

Place the items on the platen.

Placing Items (When Scanning from a Computer)

2.

Start IJ Scan Utility.

Starting IJ Scan Utility

3.

Click 

Settings...

.

The Settings dialog box appears.

4.

Click 

Custom Scan

.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands