manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 310

Scanning in Advanced Mode

Use the 

Advanced Mode

 tab to specify the color mode, output resolution, image brightness, color tone,

etc. when scanning.

See "

Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)

" to scan multiple

documents at one time.

See "

Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode

" to scan

multiple documents placed on the ADF (Auto Document Feeder).

Important

The following types of documents may not be scanned correctly. In that case, click 

 (Thumbnail)

on the Toolbar to switch to whole image view and scan.

Photos that have a whitish background
Documents printed on white paper, hand-written text, business cards, etc.
Thin documents
Thick documents

The following types of documents may not be scanned correctly.

Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to various shapes

1.

Place the document on the Platen, then start ScanGear (scanner driver).

Placing Items (When Scanning from a Computer)

Starting ScanGear (Scanner Driver)

2.

Click the 

Advanced Mode

 tab.

The tab switches to 

Advanced Mode

.

Note

Settings are not retained when you switch modes.

3.

Set 

Input Settings

 according to the document or purpose.

Input Settings

4.

Click 

Preview

.

Preview image appears in the Preview area.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands