manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 323

Adjusting Saturation and Color Balance

In ScanGear (scanner driver)'s 

Advanced Mode

 tab, click 

 (Saturation/Color Balance).

Note

Click 

Defaults

 to reset all adjustments in the current window.

Saturation

Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.

Move 

 (Slider) under 

Saturation

 to the left to decrease the saturation (darken the image), and to the

right to increase the saturation (brighten the image). You can also enter a value (-127 to 127).

Saturation decreased

Original image

Saturation increased

Note

The natural color tone of the original image may be lost if you increase saturation too much.

Color Balance

Adjust images that have a colorcast. "Colorcast" is a phenomenon where a specific color affects the entire
picture due to the weather or ambient strong colors.

Move 

 (Slider) under 

Color Balance

 to the left or right to emphasize the corresponding color.

Cyan & Red
Magenta & Green
Yellow & Blue

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands