Canon MX520 series, Online Manual

Page: 407 / 953

Setting Items on the Operation Panel of the Machine
You can change the scan settings such as the scan size, resolution, or data format.
When the Scan standby screen is displayed, press the right Function button to select the setting item. Use
the button to select the setting item, use the button to specify the setting, then press the OK
button.
Note
The scan setting cannot be specified under the following conditions:
When Auto scan is selected for Doc.type to forward the scanned data to the computer (except
for ADF orientation )
When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 7 and Windows Vista)
Depending on the destination, some setting items cannot be selected. This section describes the
setting items when you select USB flash drive on the screen for selecting to which you save the data.
The setting item which cannot be selected is displayed grayed out.
Some settings cannot be specified in combination with the setting of other setting item, the document
type selected for Doc.type , or the scan menu on the screen for selecting to which you save the data. If
the setting which cannot be specified in combination is selected, Error details is displayed on the
LCD. In this case, press the left Function button to confirm the message, then change the setting.
The specified scan settings other than ADF orientation such as the scan size, resolution, and data
format are retained even if the machine is turned off.
When scanning starts in the scan menu that is not available with the specified setting, The specified
function is not available with current settings. is displayed on the LCD. Change the setting,
following the on-screen instructions.
When you forward the scanned data to the computer or attach the data to an e-mail, you can specify
the destination and file name using Canon IJ Scan Utility.
Settings Dialog Box
If you scan originals from the computer, you can scan with advanced settings. For details on scanning
from the computer:
Scanning Photos and Documents
1. Scan size
Select the size of the original.
Note
When Legal is selected, load the original in the ADF.
When 4"x6"(10x15cm) , 5"x7"(13x18cm) , or Auto scan is selected, load the original on the
platen glass.
2. Format
Select the data format of the scanned data.
3. Scan res (Scan resolution)
Select the resolution for scanning.