manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 432

Print Results Not Satisfactory

If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the
paper and print quality settings first.

•

Check 1: Do the page size and media type settings match the size and

type of the loaded paper?

When these settings are incorrect, you cannot obtain a proper print result.

If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality
of the printout color.

Also, if you print with an incorrect paper type setting, the printed surface may be scratched.

In borderless printing, uneven coloring may occur depending on the combination of the paper type
setting and the loaded paper.

The method of confirming the paper and print quality settings differs depending on what you do with
your machine.

To copy by operating the machine

Confirm by using the operation panel on the machine.

Setting Items

To copy photo by operating the machine

Confirm by using the operation panel on the machine.

Copying Photos

To print from your USB flash drive by
operating the machine

Confirm by using the operation panel on the machine.

Setting Items

To print photo on an online photo album by
operating the machine

Confirm by using the operation panel on the machine.

Printing Photos in Online Photo Album

To print from a PictBridge compliant device

Confirm by using your PictBridge compliant device.

About PictBridge Print Settings

Confirm by using the operation panel on the machine.

PictBridge print settings

To print from a mobile phone

Confirm by using the operation panel on the machine.

Mobile phone print settings

To print from a computer

Confirm by using the printer driver.

Printing with Easy Setup

•

Check 2: Make sure that the appropriate print quality is selected

referring to the table in Check 1.

Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven
colors, increase the print quality setting and try printing again.

Note

When printing from a PictBridge compliant device, set the print quality setting by using the

operation panel on the machine.
You cannot make this setting from a PictBridge compliant device.

You cannot change the print quality setting when printing from a mobile phone.

•

Check 3: If the problem is not resolved, there may be other causes.

See also the sections below:

Cannot Print to End of Job

Part of the Page Is Not Printed

No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks

Colors Are Unclear

Lines Are Misaligned

Line Does Not Print or Prints Partially

Image Does Not Print or Prints Partially

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands