manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 399

Attaching the Scanned Data to E-mail Using the Operation
Panel of the Machine

You can attach scanned data to an e-mail using the operation panel of the machine.

Before attaching scanned data to an e-mail, confirm the following:

•

MP Drivers are installed.

If MP Drivers are not yet installed, insert the Setup CD-ROM into the computer's disc drive, then install
MP Drivers.

•

The machine is connected to a computer correctly.

Make sure that the machine is connected to the computer correctly.

Do not plug in or unplug the USB or LAN cable while the machine is in operation, or when the
computer is in the sleep or standby mode.

If you perform scanning via a network connection, make sure that all the required settings have been
specified.

Network Scan Settings

•

The mail software and the file name are specified in Canon IJ Scan

Utility.

You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of
Canon IJ Scan Utility:

Settings Dialog Box

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Press the 

SCAN

 button.

The screen for selecting to which you save the data is displayed.

Note

If the Scan standby screen for forwarding the data to the USB-connected computer is displayed

on the LCD, press the left 

Function

 button to display the screen for selecting to which you save

the data.

3.

Select 

 

Attach to E-mail

, then press the 

OK

 button.

4.

Use the 

 button to select the computer to forward the scanned data, then press

the 

OK

 button.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands