Canon MX520 series, Online Manual

Page: 350 / 953

To enlarge/reduce the scanned image, enter values into (Width) and (Height) in
Output Settings or specify a value (by 1 %) for % . Although the maximum value available for %
depends on the Output Resolution , it can be specified for up to 19200 dpi (the maximum
available output resolution).
• Paper Size (L, A4, etc.) & Monitor Size (1024 x 768 pixels, etc.)
(Width), (Height), and scale cannot be specified. The preview image will be cropped
according to the selected output size and resolution. The portion within the cropping frame will be
scanned at the size of the selected paper/monitor size. You can drag the cropping frame to enlarge,
reduce, or move it while maintaining the aspect ratio.
• Add/Delete...
Opens the Add/Delete the Output Size dialog box, in which you can specify custom output sizes.
In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save them
at one time. Saved items will be registered to the Output Size list and can be selected, along with
the predefined items.
Add
To add a size, select Print or Image display for Destination , then enter Output Size Name , Width ,
and Height then click Add . For Unit , you can select inches or mm when Destination is Print but
you can only select pixels when Destination is Image display . The name of the added size
appears in Output Size List . Click Save to save the items listed in Output Size List .
Delete
To delete an item, select it in Output Size List and click Delete . Click Save to save the items listed
in Output Size List .
Important
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels .
Note
Save up to 10 items for each destination.
An error message appears when you enter a value outside the setting range. Enter a value
within the range displayed in the message.
Note
See " Adjusting Cropping Frames (ScanGear) " for details on cropping frames.
For details on whether or how the cropping frame is initially displayed on a preview image, see
Cropping Frame on Previewed Images in " Preview Tab " ( Preferences dialog box).
• (Switch Aspect Ratio)
Available when Output Size is set to anything but Flexible .
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
• Data Size
The file size of the preview image when saved is displayed.
Note
When the file size exceeds a certain size, the value appears in red. In that case, a warning
message appears when you click Scan . It is recommended that you adjust the settings to reduce
Data Size . To continue, scan in whole image view.