manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 361

Preview Tab

On the 

Preview

 tab, you can specify the following settings.

•

Preview at Start of ScanGear

Select what to do with Preview when ScanGear (scanner driver) is started.

•

Automatically Execute Preview

ScanGear will automatically start previewing at startup.

•

Display Saved Preview Image

The previously previewed image will be displayed.
The Color Adjustment Button settings, the Toolbar settings, and the 

Advanced Mode

 tab settings

are also saved.

•

None

No preview image will be displayed at startup.

Note

Select 

None

 if you do not want to save the preview image.

•

Cropping Frame on Previewed Images

Select how to display cropping frames after previewing images.

•

Execute Auto Cropping on Previewed Images

The cropping frame (scan area) will automatically be displayed in the document size after
previewing.

•

Display the Last Frame on Previewed Images

A cropping frame of the same size as the last used cropping frame will be displayed after
previewing.

•

None

No cropping frame will be displayed after previewing.

•

Cropping Size for Thumbnail View

Select the cropping size for thumbnails of scanned documents.

•

Larger

Displays 105 % (in width and height) of the area displayed for the standard size.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands