manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 677

Resending Faxes (Redialing a Busy Number)

There are two methods of redialing: Automatic redialing and Manual redialing.

• Automatic Redialing

If you send a document and the recipient's line is busy, the machine will redial the number after a
specified interval.

Automatic Redialing

• Manual Redialing

You can redial to the recipients dialed using the Numeric buttons.

Manual Redialing

Important

It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect

registration of fax/telephone numbers. When you send important documents, it is recommended that
you send them after speaking on the telephone.

Sending a Fax after Speaking on Telephone

Note

Automatic redialing is enabled by default.
For details on the basic sending operations:

Sending Faxes with the Numeric Buttons

Automatic Redialing

You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the
maximum number of redial attempts and the length of time the machine waits between redial attempts.

Enable and specify the automatic redialing setting on 

Auto redial

 in 

Advanced FAX settings

 under 

FAX

settings

.

Advanced FAX settings

Important

While automatic redialing, the unsent fax is stored in the machine's memory temporarily until the

sending fax is complete. If a power failure occurs or you unplug the power cord before automatic
redialing is complete, all faxes stored in the machine's memory are deleted and not sent.

Note

To cancel automatic redialing, wait until the machine starts redialing, then press the 

Stop

 button.

To cancel automatic redialing, delete the unsent fax from the machine's memory while the machine is

on-standby for a redial operation. For details, see 

Deleting a Document in Machine's Memory

.

Manual Redialing

Follow the procedure below for manual redialing.

1.

Make sure that the machine is turned on.

Confirming that the Power Is On

2.

Press the 

FAX

 button.

The Fax standby screen is displayed.

3.

Load documents on the platen glass or in the ADF.

Loading Originals

4.

Adjust the scan contrast and resolution as necessary.

Note

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands