Canon MX520 series, Online Manual

Page: 719 / 953

• When TEL priority mode is selected:
When the call is a fax:
The telephone will ring when a call incomes.
Pick up the handset. If you hear the fax tone, wait for at
least 5 seconds after it stops, then hang up the handset.
The machine will receive the fax.
Note
If the machine will not switch to fax reception, press the
FAX button, then the Color or Black button to receive
the fax.
To receive a fax without picking up the handset, set
Manual/auto switch in Advanced to ON . RX start time
allows you to specify the number of seconds until the
machine switches to fax reception.
If you have subscribed to Duplex Ringing service in
Hong Kong, the telephone will ring a specified number of
times when there is an incoming call with a fax distinctive
ring pattern. Then, the machine will switch to fax
reception automatically without the handset being picked
up.
The number of times to ring the telephone until switching
to fax reception can be changed.
Set the machine to enable you to initiate fax reception
from a connected telephone (remote reception).
Remote Reception
Note
When the answering machine is connected to the machine:
If the answering machine is set to the answering mode, set User-friendly reception in
Advanced to ON . If the call is a fax, the machine will receive the fax automatically.
If the answering mode is turned off on the answering machine, pick up the handset. If you
hear the fax tone, wait for at least 5 seconds after it stops, then hang up the handset.
If Manual/auto switch in Advanced is set to ON , set RX start time to longer than the time
before the answering machine starts playing the answering message. After making this
setting, we recommend that you call the answering machine using a mobile phone, etc. to
confirm that messages are recorded successfully in the answering machine.
Set your answering machine to answering mode and adjust it as follows:
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
When the call is a voice call: