manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 574

2801

Cause

The document is jammed in the ADF.

Action

Remove the document following the procedure below.

Important

The power cannot be turned off while the machine is sending or receiving a fax, or when the received

fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

•

If the original remains in the ADF by pressing the Stop button while the machine is
scanning the document:

If you press the 

Stop

 button during scanning then the document remained in the ADF, the message

about the paper remained in the ADF appears on the LCD. Press the 

OK

 button so that the remaining

document is automatically fed out.

•

If the original is jammed in the ADF:

Remove the document following the procedure below.

1.

If printing is in progress, press the 

Stop

 button.

2.

Turn off the machine.

3.

If a multi-page document is loaded, remove any pages other than the jammed page from the ADF,
then open the document feeder cover.

4.

Pull out the jammed document from the ADF.

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands