manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 230

Easy Scanning with Auto Scan

You can scan easily by automatically detecting the item type.

Important

The following types of items may not be scanned correctly. In that case, adjust the cropping frames

(scan areas) in whole image view of ScanGear (scanner driver) and scan again.

Photos that have a whitish background
Items printed on white paper, hand-written documents, business cards, etc.
Thin items
Thick items

Adjusting Cropping Frames (IJ Scan Utility)

When scanning two or more documents from the ADF (Auto Document Feeder), place documents of

the same size.

1.

Make sure that your scanner or printer is turned on.

2.

Place items on the platen or ADF of your scanner or printer.

Placing Items (When Scanning from a Computer)

3.

Start IJ Scan Utility.

Starting IJ Scan Utility

4.

Click 

Auto

.

Scanning starts.

Note

Click 

Cancel

 to cancel the scan.

To apply suitable corrections based on the item type, click 

Settings...

, then select the 

Apply

recommended image correction

 checkbox in the 

Settings (Auto Scan)

 dialog box.

Scanned images are saved in the folder set for 

Save in

 in the 

Settings (Auto Scan)

 dialog box

displayed by clicking 

Settings...

. In the 

Settings (Auto Scan)

 dialog box, you can also make

advanced scan settings.

Settings (Auto Scan) Dialog Box

Refer to the following pages to scan by specifying the item type.

Scanning Photos
Scanning Documents
Scanning with Favorite Settings
Scanning Multiple Documents at One Time from the ADF (Auto Document Feeder)

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands