manualshive.com logo in svg

Canon MX520 series, Online Manual

Share
Download
Canon MX520 series Online Manual Download Page 72

Replacing a FINE Cartridge

When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error. Take
appropriate action according to the message.

A Message Is Displayed

 Note

 For information on the compatible FINE cartridge, refer to the printed manual: 

Getting Started

.

Replacing Procedure

When you need to replace a FINE cartridge, follow the procedure below.

 Important

Handling FINE cartridge

 Do not touch the electrical contacts 

(A)

 or print head nozzle 

(B)

 on a FINE cartridge. The machine may not print

properly if you touch them.

 If you remove a FINE cartridge, replace it immediately. Do not leave the machine with the FINE cartridge removed.
 Use a new FINE cartridge for replacement. Installing a used FINE cartridge may cause the nozzles to clog.

Furthermore, with such a FINE cartridge, the machine will not be able to inform you when to replace the FINE
cartridge properly.

 Once a FINE cartridge has been installed, do not remove it from the machine and leave it out in the open. This will

cause the FINE cartridge to dry out, and the machine may not operate properly when it is reinstalled. To maintain
optimal printing quality, use a FINE cartridge within six months of first use.

 Note

 If a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever ink remains,

only for a while. However the print quality may be reduced compared to when printing with both cartridges. We
recommend to use a new FINE cartridge in order to obtain optimum qualities.
Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE
cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print.
For information on how to configure this setting, see 

Setting the Ink Cartridge to be Used

.

 Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is

specified.
Both color ink and black ink are also consumed in the standard cleaning and deep cleaning of the print head, which
may be necessary to maintain the performance of the machine. When ink runs out, replace the FINE cartridge
immediately with a new one.

Useful Information about Ink

1.

Make sure that the power is turned on, open the front cover 

(C)

, then open the paper output tray

(D)

.

72

Summary of Contents for MX520 series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands