Canon imagePRESS 1110 Service Manual Download Page 942

Page: 942 / 1603

7-210

Error Code > Alarm Code > Alarm Code Details

Location Code

Description

Detailed description

- 0001 Inserter: Drive switch motor

does not go through the

home position.

It does not go through the home position even

though the drive switch motor is operated by the

specified pulse.

Operation: Drive switch motor is stopped urgently.

The paper on the inserter upper tray and lower tray

is removed.

- 0002 Inserter: Drive switch motor

does not return to the home

position.

It does not go through the home position even

though the drive switch motor is operated by the

specified pulse.

Operation: Drive switch motor is stopped urgently.

The paper on the inserter upper tray and lower tray

is removed.

- 0003 Inserter: Up/down motor

of upper tray does not go

through the home position.

It does not go through the home position even

though the inserter upper tray up/down motor is

operated by the specified pulse.

Operation: Inserter upper tray up/down motor is

stopped urgently. The paper on the inserter upper

tray is removed.

- 0004 Inserter: Up/down motor of

upper tray does not return

to the home position.

It does not return to the home position even though

the inserter upper tray up/down motor is operated

by the specified pulse.

Operation: Inserter upper tray up/down motor is

stopped urgently. The paper on the inserter upper

tray is removed.

- 0005 Inserter: Up/down motor

of lower tray does not go

through the home position.

It does not go through the home position even

though the inserter lower tray up/down motor is

operated by the specified pulse.

Operation: Inserter lower tray up/down motor is

stopped urgently. The paper on the inserter lower

tray is removed.

- 0006 Inserter: Up/down motor of

lower tray does not return

to the home position.

It does not return to the home position even though

the inserter lower tray up/down motor is operated

by the specified pulse.

Operation: Inserter lower tray up/down motor is

stopped urgently. The paper on the inserter lower

tray is removed.

- 0007 Inserter: Tray width volume

is broken.

At the fitst initialization of inserter, there is an error

in A/D value of A4 vertical width or A4 horizontal

width of upper tray that is saved in EEPROM.

Operation: The paper on the inserter upper tray is

removed.

- 0008 Inserter: Tray width volume

is broken.

At the fitst initialization of inserter, there is an error

in A/D value of A4 vertical width or A4 horizontal

width of lower tray that is saved in EEPROM.

Operation: The paper on the inserter lower tray is

removed.

- 0004 LIPS

Work memory for translator overflow.

Location Code

Description

Detailed description

- 0006 LIPS

Error in configuration acquisition/management

- 0007 LIPS

Memory management error in LIPS

- 0008 LIPS

File management error in LIPS

- 0009 LIPS

Reception data management error

- 0010 LIPS

Page control error

- 0011 LIPS

Macro management error

- 0012 LIPS

Color management error

- 0013 LIPS

Layout control error

- 0014 LIPS

Font management error

- 0015 LIPS

Letter drawing error

- 0016 LIPS

Graphic drawing error

- 0017 LIPS

Image drawing error

- 0018 LIPS

Display error to LCD

- 0019 LIPS

Text mode command error, layer error

- 0020 LIPS

Vector mode command error, layer error

- 0021 LIPS

Utility execution control error

- 0022 LIPS

Database management error in LIPS

- 0023 LIPS

Menu control error in LIPS

- 0024 LIPS

Boot error in LIPS

- 0025 LIPS

When the graphic library is in use for image

processing, if the memory allocation is failed.

- 0026 LIPS

Data format error of image mode

- 0001 Font

No memory for internal font

- 0002 Font

Fails to assure the work area to analyze the font

that is downloaded at “Resource Download”.

- 0003 Font

Fails to access the file that stores the font.

- 0004 Font

Fails to allocate the FM work memory.

- 0005 Font

Fails to analyze the internal font.

- 0006 Font

Alignment of font data is wrong.

- 0007 Font

Fails to allocate the work memory in scalar. There

are 3 types depending on occurrence location.

- 0008 Font

Fails to allocate the work memory in scalar. There

are 3 types depending on occurrence location.

- 0001 PDL

Fails to allocate the memory

- 0002 PDL

Failure of rendering

- 0003 PDL

DGL entry invalid

- 0005 PDL

Other errors

Summary of Contents for imagePRESS 1110




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands

Canon imagePRESS 1110, Service Manual

Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands