Canon imagePRESS 1110 Service Manual Download Page 1394

Page: 1394 / 1603

8-451

Service Mode > SORTER > OPTION

SORTER> OPTION

GLU-OF1C

Coated booklet glue amount set1: P binder

Lv.1 Details

To set the adjustment value of glue application amount at perfect

binding (coated paper 50 sheets or less, coated paper + plain paper

50 sheets or less).

The glue application amount is adjusted by changing the space

between the paper stack and the scraper plate on the return way at

the glue thick application.

As the value is changed by 1, the space gets wider/narrower by

0.05 mm (as the space is widened, the glue application amount is

increased).

+: space is widened (application amount increased)

-: space is narrowed (application amount is decreased)

Use case

When the glue application amount on the paper stack is not

appropriate

Adj/set/operate method 1) Enter the setting value and press OK key.

2) Turn OFF/ON the main power.

Display/adj/set range

-6 to 6

Unit

0.05 mm

Default value

Related user mode

Additional Functions> System Settings > Device Management

Settings > Perfect binding glue application amount fine adjustment

GLU-OF2C

Coated booklet glue amount set2: P binder

Lv.1 Details

To set the adjustment value of glue application amount at perfect

binding (coated paper 51 to 100 sheets, coated paper + plain paper

51 to 100 sheets).

The glue application amount is adjusted by changing the space

between the paper stack and the scraper plate on the return way at

the glue thick application.

As the value is changed by 1, the space gets wider/narrower by

0.05 mm (as the space is widened, the glue application amount is

increased).

+: space is widened (application amount increased)

-: space is narrowed (application amount is decreased)

Use case

When the glue application amount on the paper stack is not

appropriate

Adj/set/operate method 1) Enter the setting value and press OK key.

2) Turn OFF/ON the main power.

Display/adj/set range

-6 to 6

Unit

0.05 mm

Default value

Related user mode

Additional Functions> System Settings> Device Management

Settings> Perfect binding glue application amount fine adjustment

SORTER> OPTION

GLU-OF3C

Coated booklet glue amount set3: P binder

Lv.1 Details

To set the adjustment value of glue application amount at perfect

binding (coated paper 101 to 150 sheets, coated paper + plain paper

101 to 150 sheets).

The glue application amount is adjusted by changing the space

between the paper stack and the scraper plate on the return way at

the glue thick application.

As the value is changed by 1, the space gets wider/narrower by

0.05 mm (as the space is widened, the glue application amount is

increased).

+: space is widened (application amount increased)

-: space is narrowed (application amount is decreased)

Use case

When the glue application amount on the paper stack is not

appropriate

Adj/set/operate method 1) Enter the setting value and press OK key.

2) Turn OFF/ON the main power.

Display/adj/set range

-6 to 6

Unit

0.05 mm

Default value

Related user mode

Additional Functions> System Settings> Device Management

Settings> Perfect binding glue application amount fine adjustment

GLU-OF4C

Coated booklet glue amount set4: P binder

Lv.1 Details

To set the adjustment value of glue application amount at perfect

binding (coated paper 151 sheets or more, coated paper + plain

paper151 sheets or more).

The glue application amount is adjusted by changing the space

between the paper stack and the scraper plate on the return way at

the glue thick application.

As the value is changed by 1, the space gets wider/narrower by

0.05 mm (as the space is widened, the glue application amount is

increased).

+: space is widened (application amount increased)

-: space is narrowed (application amount is decreased)

Use case

When the glue application amount on the paper stack is not

appropriate

Adj/set/operate method 1) Enter the setting value and press OK key.

2) Turn OFF/ON the main power.

Display/adj/set range

-6 to 6

Unit

0.05 mm

Default value

Related user mode

Additional Functions> System Settings> Device Management

Settings> Perfect binding glue application amount fine adjustment

«
...
1392
1393
1394
1395
1396
...
»

Summary of Contents for imagePRESS 1110




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands

Canon imagePRESS 1110, Service Manual

Search results

Summary of Contents for imagePRESS 1110

Reviews:

Related manuals for imagePRESS 1110

Brands by name

Popular brands