8
8
8-296
8-296
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK8-ASST
Air heater setting of POD3 upper deck
Lv.1 Details
Set the condition (media/environment) to turn on the paper
separation air heater at the second tandem POD upper deck.
When the media is switched from non-coated paper to coated paper,
paper pickup operation does not start until the temperature of the
paper separation air heater reaches the specified temperature.
To shorten the wait time, make a setting of “Not dependent on the
media”.
When the use environment is near the threshold for turning ON/
OFF the heater, switching occurs frequently, which increases the
wait time. To shorten the wait time, make a setting of turning on the
heater constantly.
Use case
When it is requested to shorten the wait time
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Caution
• To make a setting of “Not dependent on the media”, be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance for non-coated
paper may decrease.
• To make a setting of turning on the heater constantly, be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance may decrease when
humidity decreases.
Display/adj/set range
0 to 2
0: Dependent on the media and environment condition
1: Dependent on the environment condition (Not dependent on the
media)
2: Turning on the heater constantly (Not dependent on environment/
media)
Default value
0
Related service mode
COPIER> OPTION> USER> DK1-ASST to DK7-ASST, DK9-ASST,
DK10ASST
COPIER > OPTION > USER
DK9-ASST
Air heater setting of POD3 middle deck
Lv.1 Details
Set the condition (media/environment) to turn on the paper
separation air heater at the second tandem POD middle deck.
When the media is switched from non-coated paper to coated paper,
paper pickup operation does not start until the temperature of the
paper separation air heater reaches the specified temperature.
To shorten the wait time, make a setting of “Not dependent on the
media”.
When the use environment is near the threshold for turning ON/
OFF the heater, switching occurs frequently, which increases the
wait time. To shorten the wait time, make a setting of turning on the
heater constantly.
Use case
When it is requested to shorten the wait time
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Caution
• To make a setting of “Not dependent on the media”, be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance for non-coated
paper may decrease.
• To make a setting of turning on the heater constantly, be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance may decrease when
humidity decreases.
Display/adj/set range
0 to 2
0: Dependent on the media and environment condition
1: Dependent on the environment condition (Not dependent on the
media)
2: Turning on the heater constantly (Not dependent on environment/
media)
Default value
0
Related service mode
COPIER> OPTION> USER> DK1-ASST to DK8-ASST, DK10ASST
Summary of Contents for imagePRESS 1110
Page 242: ...3 3 Periodical Service Periodical Service Periodical service item ...
Page 655: ...5 5 Adjustment Adjustment Overview When replacing parts Major adjustment ...
Page 944: ...8 8 Service Mode Service Mode Overview COPIER FEEDER SORTER BOARD Situation Mode ...
Page 1555: ... Service Tools General Circuit Diagram General Timing Chart Operator Maintenance Appendix ...