Calrec Artemis, Installation And Technical Manual

Page: 32 / 124

32 ARTEMIS
Digital Broadcast Production Console
Processing Core – Beam / Shine
ST1 ST2
ST3 ST4
ST5 ST6
AC IN
USB
POK ST0
PSU
PowerSupply
Card slots 9 & 10 are for PSU modules.
Both slots share the power load for the
whole core. One PSU module is sufficient
to power the whole core, two are fitted to
provide redundancy.
Each card has an IEC AC mains input
connector, requiring 100–240V AC.
Router/Expander
The primary, normally active router card
fits in slot 2, the secondary in slot 7. As
an option, slots 1 and 8 can be fitted with
additional router modules of the same
type to double the number Hydra2 I/O
ports in the core.
The Artemis Shine / Beam router card
has 16 SFP ports that can be fitted with
copper or fibre SFP's to allow connection
of Hydra2 I/O boxes and connections to
other consoles' routers and standalone
router cores. A single RJ45 port labelled
Ethernet allows for the connection of 3rd
party equipment supporting the SW-P-08
or Ember protocols for remote control.
As well as standard status LED's there are
front panel LED indicators to show activity
on each port.
ROUTER / EXPANDER
POK MA
PRI RST
MOK NOK
ST1 ST2
9
11
13
15
10
12
14
16
1
3
5
7
2
4
6
8
10 9
12 11
14 13
16 15
2 1
4 3
6 5
8 7
ETHERNET
LINKS
LINKS
PSU MODULE ROUTER/EXPANDER MODULE