Calrec Artemis, Installation And Technical Manual

Page: 120 / 124

120 ARTEMIS
Digital Broadcast Production Console
Specifications
Power
Modular Hydra2 I/O frames are fitted with dual power supplies and have 2 IEC mains input
connectors. Units will be fully functional on one PSU, however both should be fed where possible
from separate sources to provide redundancy against both PSU failure and external power loss.
The operating AC supply voltage is 100V–240V +/-10%.
The peak inrush current is limited (cold start). This reduces the chance of a nuisance trip or fuse
blow from power up. The RMS quiescent and peak inrush current figures are dependant upon
the quantity and type of I/O cards fitted. Please refer to the Hydra2 installation manual for more
details on modular I/O.
Heat Output & Efficiency
The Heat output from modular Hydra2 I/O units depends upon the quantity and card types fitted,
please refer to the Hydra2 installation manual for more detail on modular I/O.
Cooling
Fans mounted to the PSUs at the back of the core draw air through the PSUs and the core itself.
Air is drawn up through the base of the core which is recessed to allow air to enter through the
side, and for the units to be mounted with no clearance above or below. The bottom of the sides of
the modular I/O box should be unobstructed with at least 50mm (2') clearance to allow airflow.
Modular I/O units may be mounted in an open bay providing the ambient air temperature is within
limits (see below). The units may also be housed in air conditioned bays.
Operating Ambient Air
Temperature
0°C - 35°C
Relative Humidity 5% – 80% Non-condensing
HYDRA2 MODULAR I/O