Calrec Artemis, Installation And Technical Manual

Page: 103 / 124

CALREC
Putting Sound in the Picture
103
UPSTAND TFT PANEL - MU5794
The MU5794 TFT touchscreen panels
make up the majority of the Artemis
upstand.
The upper section of up-stand TFT panels
display audio level and phase meters, as
setup in the Main Application. The lower
section of the panel works in conjunction
with the fader panel fitted directly below,
providing assignable panel display and
control for EQ, routing, output control etc.
This panel will not be functional without a
fader panel to drive it.
Connections
The panel receives power via an RJ45,
connected from a POE switch ancillary
power port. Data is passed via a (NOT*)
DVI connector, fed from the fader panel
located directly below.
*Note, the connector type is DVI, but the
format is not DVI - This should not be
connected to anything other than Calrec
TFT panels, doing so may damage the
equipment.