Calrec Artemis, Installation And Technical Manual

Page: 10 / 124

10 ARTEMIS
Digital Broadcast Production Console
Control Surface
SURFACE DIMENSIONS AND ASSEMBLY
The Artemis control surface can be
customised in terms of width and
fader count, and can be provided with
a number of stand and trim options.
Desk-topmounting
The control surface can be supplied with
no floor stand, or if supplied, the floor
stand can be removed allow for desk-top
mounting, as shown in Figure 1.
Floorstandoptions
Several floor stand types are available.
The standard 'Studio' type, as shown in
Figure 2 has adjustable feet for levelling.
The 'OB' version, shown in Figure 3
allows for the stand to be bolted to the
floor, typically for use in mobile or outside
broadcast units. Note the OB version
is 7.8mm [0.31'] taller than the Studio
version. Both the Studio and OB style
are also available with a reduced height,
sitting the console 40mm [1.57'] lower
than the standard versions.
FIGURE 2 - STANDARD HEIGHT STUDIO STAND, END ELEVATION
FIGURE 1 - NO FLOOR STAND FITTED, END ELEVATION
857 [33.74”]
129 [5.08”]
384 [15.19”]
74 [2.91”] 122 [4.41”]